90’lık U Tip Şömine #2

• In order to ensure efficient combustion, the oxygen level entering the chamber can be adjusted with the flap valve. The control of the lower cold air inlet allows the fire to be put to sleep. Thus, the oxygen supply can be kept at a certain level; more combustion efficiency can be achieved from wood fire.

• The cold air taken from outside is directed directly to the windows with the help of ducts. This system, called upper air curtain, ensures that the windows are less soaked.

• Wick protection resistant to 900 degrees is used to ensure the cover smoke tightness of the fireplace. This wick, which is used, ensures that the oxygen input is kept at the desired level by squeezing between the cover and the body. At the same time, this wick, which surrounds the cover section, prevents smoke leakage into the heat chamber.

• In our hoppers, the cover section is connected to the body with imported rail system. In this way, a lift system that does not make noise and jamming has been obtained.

• Our flame breaker technology, which is produced in disassembled form, targets heat accumulation and prevents the heat from escaping immediately with smoke. In short, a lot of loveliness is achieved with little fuel.

• The castings used are 100% cast iron and 12 mm thick.

• The fireplace combustion area is made of 3 mm thick boiler steel.

• Vitro ceramic glass resistant to 850 degrees is used in our lids.

• Fireplace bearings 6005 quality high temperature resistant bearings are used.

• Fireplaces are painted with Ceramic Paint resistant to 600 degrees. Thanks to the fireproof paint, an elegant appearance is obtained inside the chamber and in the cover section.